Nissan Largo Friends

Hi im a new Largo (diesel) owner i swapped my MR2 MK2 for this and although its not as fast it is certainly wins me over, i will keep this one for a long time! how do you carry out a code read and for what would you do this for? i tried to follow someones link on here but said i wasnt authorised to see that page? I have a couple of probs though.. My Engine check light starts flashing sometimes when i pull away in drive (code read help?), and a small but steady oil leak from underneath middleish area towards driver side any help would be great thanks..

Hi and welcome, do a search

Hutch

Hi. Welcome to the forums. You probably tried viewing before posting your introduction
Once you post you gain access to the whole forums.
Here is a link for code reading. You will need a small piece of wire to bridge pins on the consult port.
viewtopic.php?f=20&t=2528

Cueball from Pembrokeshire

Oil leak sound's like it could be where your filter is.

I bought a new air, fuel and oil filter. The air filter ive just put in, into an empty space where it should of been!!! never seen that before! Im yet to fit the oil and fuel filter but it looks like the oil is dripping near where the oil filter is sited.

Oil leak will be came cover gasket. At a guess its coming from the fuel pump location behind it down the side of the gearbox?